Swedish market leader in electric elements and cartridges.
ELECTRIC ELEMENTS
1. Factory connected power simplifies and reduces installation costs.
2. Electrical controls easy to access
3. Stainless steel SIS 14 2348 or copper coils, cope with most water qualities.
If the container is of coppery material you can order our copper element instead.
The same concerns water that is brackish or has a high chloride content.
4. Sensible accessory, e.g. a load guard that protects your main fuses.
5
. Automatic control, standard: It is possible to install an electric element in most boilers and accumulator tanks*. Electric element VB 1510 - VB 6010 Electric element VB 3020 - VB 6020
Electric element VB 6002 - VB 9002 Electric element VB 6003 F - VB 9003 F * Tanks with long element sleeves require special elements. These are signified by an "L" after the product name.
• Thermostat in one or several steps.
• Overheat protection (manual reset).
• Operation indicator.
• Built-in main switch (not VB 3020-VB 6020).
Electricity is the perfect complement to firewood. When the fire has gone out and you do not have time or feel like burning more you can let the electric element take over automatically. An electric element also guarantees function if the burner starts playing up or if you are out of pellets or firewood..
Output requirement
Output requirement
These electric elements are suitable if you do not need a larger output than 6kW or when you want to complement with an F model element for greater output.
VB 3020 - VB 6020 has two output steps and no main switch but is otherwise the same as VB 1510 - VB 6010.
If your main fuse is already well loaded and you do not need more than 6kW, VB 6002 is a good alternative because the output is divided and only one output step is normally used. VB 9002 is for industrial use only (no time delay).
These F models are equipped with a time delay of the entire or half of the output. They can also be equipped with a load guard, VBB 12 TX, or an outdoor temperature compensator, UTK 2000.
ELECTRIC CARTRIDGES
1. Electronic controls are easy to access under the lid.
2. Automatic control, standard:
Thermostat, overheat protection, operational indicator, built-in breaker and time delay (not K-060).
3. Compact dimensions
4. . Factory connected power simplifies and reduces
installation costs.
5. Small water volume and well-insulated container ensures low heat loss. If your water heater is not prepared for an electric element you can connect an electric cartridge instead. An electric cartridge is basically an electric element mounted in a water container, or an electric boiler without a hot water heater. Electric cartridge K-060 Electric cartridge EK 13 Electric cartridge EK 15 E Electric boilers 26-300kW.
It is easy to install an electric cartridge to the boiler via an expansion pipe and docking socket or draining tap. A circulation pump should be installed to ensure water circulation.
K-060 is an insulated container for electric elements. All electric elements with R50 connection and maximum plug-in length of 420mm can be mounted in the container giving an output of 1.5kW to 9kW.
EK 13 has a total output of 13kW, divided into three steps (6+4+3kW). Built-in time delay and fused socket for a circulation pump.
EK 15 has a total output of 14.7kW, divided into seven steps (7+2,1kW). Built-in time delay and fused socket for a circulation pump.
For greater output than 15kW, we have a wide assortment of electric boilers in the 26 to 300kW range.
Home