Electric boilers Homes |    Electric boilers Properties

Download folder ELOMAX
Information and
technical specifications

ELOMAX ELECTRIC BOILER
Double shelled electric heaters

Do you need to do something about your heating costs but want to avoid large investments at the present time? ELOMAX are robust boilers that can be complemented at any time with a heat pump or solar panels. These boilers is simple to install and provides a future proof heating system at a low cost.
ELOMAX looks after itself and ensures you always have a uniform and pleasant indoor temperature. The boiler automatically controls the heat pump/solar panels. ELOMAX is a solid foundation in your heating system that ensures it can be complemented or changed at any time.
ELOMAX provides good economy and comfort. Easy and cheap to install, manages itself and controls other units for maximum economy. Regardless of whether you intend to use the boiler alone or together with a heat pump/solar panels, you have made a good future choice.
Your house increases in value as well because through its flexibility, ELOMAX keeps the door open to connecting other heating sources. A good solution in a time of fluctuating energy prices.

What is a double-shelled electric boiler?
ELOMAX's "shell" contains the water and the hot water heater which together are used to store heat from a heat pump or solar panels.

Heat pump
ELOMAX controls the heat pump so that it can be used optimally but still moderately. The heat pump gets a longer lifespan through fewer start/stops.

Solar panels
ELOMAX ensures that solar panels are used optimally in spring, summer and autumn. Even sunny winter days can provide additional hot water and indoor heating.

A flexible and economic heating solution.

Elomin III electric boiler
A small compact electric boiler with "floating" boiler temperature. The boiler is climate controlled, which means the outdoor temperature controls the amount of heat the boiler needs to supply the house with.

Elomin III CU 200
With a 200-litre hot water heater.

Elomin III electric boiler

Climate-controlled for low costs
The heat in the house is controlled by the outdoor temperature, giving low operational costs. The boiler's output is 13.1kW in seven steps.

• A 7-step load guard protects your main fuse. This function limits the boiler's output in steps if for instance your washing machine, tumble drier or oven are on at the same time as the boiler.

• Summer mode.When there is no heating requirement, the heating closes automatically leaving just the hot water heater on.

• Well designed. The circulation pump starts at regular intervals during the summer months to ensure that it does not seize up when autumn arrives.

• The boiler controls only need to be set at installation, it then manages itself.

• Adjustable maximum and minimum radiator temperatures means you can heat separate rooms or the cellar when the rest of the house has no heating requirement, e.g. in the summer. A unique function that is self-explanatory but which Elomin III has had exclusive use of for some time.

• Elomin III comes in two designs.As a CU 200 complete electric boiler with a 200-litre hot water heater, and a UB design, without a hot water heater, that suits all module hot water heaters of 600x600mm dimensions.

• Reliable
Built-in pressure-controlled bypass valve prevents operational disturbances and extends the lifespan of the boiler.

• Easy to service
The boiler is opened from the front making it easy to service.

Elomin III comes complete with climate-controlled heating, load guard, expansion vessel, circulation pump and much more.

The majority of Värmebaronen's products leave the factory complete with all equipment factory mounted.
We do this for two reasons:
• Security.
The boiler will function problem-free because it is equipped properly.
• No extra costs..
When you choose Elomin III you get a complete electric boiler with all the equipment required. The CU 200 model with a hot water heater is naturally also fully complete. If you choose another brand, you will need a circuit breaker between the boiler and hot water heater, which is an extra expense.


Take a careful look at what is included in the shipment when you compare with other boilers. It could be a greater difference than you realise.

Thermo Flow NG

VE 4

Elomin III UB
(without a hot water heater).
Suits all water heaters with standard dimensions 600x600mm

Thermo Flow NG and VE4

Flexible, wall-mounted electric boiler for most heating needs.
Thermo Flow NG can be used for most heating needs, while midget VE 4 is mostly used in smaller places and extensions.
These boilers do not have built-in heaters or heat exchangers for hot water.

Compact design
The boilers are small and therewith easy to position. But despite their size they can heat larger areas than you think.

Complete boilers
The boilers are delivered complete. Only water and power needs to be connected then the system is ready to use.

Thermo Flow NG
Wall-mounted electric boiler with an output of 11kW. Just like Elomin III, the boiler is climate controlled, which means the outdoor temperature controls the amount of heat the boiler produces. The boiler shuts automatically when there is no heating requirement.
The circulation pump starts at regular intervals during the summer months so that it does not seize up when autumn arrives. Thermo Flow NG has frost protection.
A pressure-controlled bypass valve extends the lifespan of the boiler and guarantees safe operation.

Load guard
A 7-step load guard protects your main fuse. This function limits the boiler's output in steps if for instance your washing machine, tumble drier or oven are on at the same time as the boiler.

 

VE 4
The boiler's output of 4.5kW corresponds to the heating needs of a 80-100m² living space depending on installation and ventilation. The boiler is controlled by a built-in thermostat.

VE 4 accessories
UTK 2000 ensures that the outdoor temperature regulates the boiler, a built-in function in Thermo Flow NG. Room thermostat available as an accessory.

 Electric boilers Industrial |   Electric boilers DOMESTIC  

Electric boilers
For larger houses and industrial processes

EP 26 E • EP 27•  EP 42 E
26 kW            27 kW       42 kW

EP 31-300 NG Series
Up to 1,200 kW

EP 26 E
RADIATOR HEATING AND INDUSTRIAL PROCESS
EP 26 can be used for heating waterborne systems or for industrial processes. The boiler's max. output, can be limited to, for example, 22.5 or 18.75kW

STAINLESS ELECTRIC ELEMENTS
The boiler's electric elements are made from stainless steel SS 2348 with a brass head. The pressure vessel is made from steel plating and approved by the National Swedish Plant Inspectorate. Pipe connections for flow and return and draining tap are at the back of the boiler.

COMPACT DESIGN
The height is only 78cm, width 28cm and depth 63cm. Despite this there is plenty of room for electrical connection under the boiler lid where the electrics are stored.

7 OUTPUT STEPS
The boiler output is divided into 7 steps
steps that are connected in steps at temperature shortfall. The flow temperature is adjustable between 20 and 95°C.

LOAD GUARD INCLUDED
Load guard and current transformers for direct feed (35-125A) included. If your main fuse is larger than 125A, another load guard can be supplied
Reconnection after power failure in accordance with the norms of the Swedish Electricians' Union.

OUTDOOR TEMPERATURE COMPENSATOR
An outdoor temperature compensator is available as an accessory,
UTK E, for controlling the flow temperature as a function of the outdoor temperature.

BRACKETS FOR WALL MOUNTING
Brackets for wall mounting are available as an accessory,
 

EP 27
RADIATOR HEATING
AND INDUSTRIAL PROCESS
EP 27 can be used for heating waterborne systems or for industrial processes. The boiler's max. output, 27kW, can be limited to, for example, 22.5 or 18kW.

STAINLESS ELECTRIC ELEMENTS
The boiler's electric elements are made from stainless steel SS 2348 with a brass head. The pressure vessel is made from steel plating and approved by the Swedish Plant Inspectorate. Pipe connections for flow
and return and draining tap are at the back of the boiler.

COMPACT DESIGN
The height is only 78cm, width 28cm and depth 63cm. Despite this there is plenty of room for electrical connection under the boiler lid where the electrics are stored.

6 OUTPUT STEPS
The boiler output is divided into 6 steps that are connected in
steps at temperature shortfall. The flow temperature is adjustable between 30 and 85°C.

TIME DELAY
Reconnection after power failure in accordance with the norms of the
Swedish Electricians' Union.
The boiler has a sealable connection for external blocking and connection for emergency safeguard.

A LOAD GUARD IS AVAILABLE AS AN ACCESSORY
Load guard and current transformers for direct feed (50-125A) are available as accessories.
If your main fuse is larger than 125A, another load guard can be supplied.

BRACKETS FOR WALL MOUNTING
Brackets for wall mounting are available as an accessory,
 

EP 42 E
RADIATOR HEATING AND
INDUSTRIAL PROCESS
EP 42 E can be used for heating waterborne systems or for industrial processes. The boiler's max. output, 42kW, can be limited to, for example, 36 or 30kW.

STAINLESS ELECTRIC ELEMENTS
The boiler's electric elements are made from stainless steel SS 2348 with a brass head. The pressure vessel is made from steel plating and approved by the Swedish Plant Inspectorate (SA). Pipe connections for flow and return and draining tap are at the back of the boiler.

COMPACT DESIGN
The height is only 78cm, width 28cm and depth 63cm. Despite this there is plenty of room for electrical connection under the boiler lid where the electrics are stored.

7 OUTPUT STEPS
The boiler output is divided into 7 steps that are connected in steps at temperature shortfall. The flow temperature is adjustable between 20 and 95°C.

LOAD GUARD INCLUDED
Load guard and current transformers for direct feed (35-125A) included. If your main fuse is larger than 125A, another load guard can be supplied. Reconnection after power failure in accordance with the norms of the Swedish Electricians' Union.

OUTDOOR TEMPERATURE COMPENSATOR
UTK outdoor temperature compensator for controlling the flow temperature as a function of the outdoor temperature, is available as an accessory.

EP NG SERIES 31-300 kW

ELECTRIC BOILERS FOR WATERBORNE HEATING SYSTEMS AND INDUSTRIAL PROCESSES
EP 31-300 can be used in waterborne heating systems or industrial processes. When used with, for example, a flat heat exchanger, the boilers can be directly controlled by the temperature in the secondary circuit. The EP series is available in outputs from 31 to 300kW.

7 OR 15 OUTPUT STEPS, WITH OR WITHOUT OUTDOOR TEMPERATURE COMPENSATION
The boiler output is divided into 7 or 15 steps that are connected in steps at temperature shortfall. The flow temperature is adjustable at between 20 and 95°C. The boilers can be delivered with a thermostat for a constant flow temperature or with an outdoor compensation for variable flow temperatures. You can change the temperature control by changing the circuit board in the front of the boiler.
Temperature control is intelligent and adapts the output to the actual heating requirement. From a safety viewpoint, the EP series manages flows down to nought, i.e. the boilers do not need to be equipped with a flow guard. The boilers' output can be limited down to one output step.

MAXIMAL BREAKER
The boilers are equipped with a maximum breaker, which, at shunt release, is affected by the overheat protection or external safety equipment.

PUMP MOTIONING
In pump motioning mode the heating output is shut off but the circulation pump is motioned a few minutes a day.

HIGH OPERATIONAL SAFETY
In order to optimise operational safety, the boilers are equipped with a level guard and a parallel earth conductor (PEC). The task of the PEC is to quickly indicate any faults in the electric elements to enable measures to be taken without costly shut downs.

LOAD GUARD INCLUDED
Reconnection after power failure in accordance with the norms of the Swedish Electricians' Union.
The boilers have connections for external blocking,
load control, tariff control and external signal 0-10 V DC.

ALARM INDICATION
Alarm LEDS are on the front panel, the boilers also have connections for external fault indicator alarms.

STAINLESS ELECTRIC ELEMENTS
The boiler's electric elements are made from stainless steel SS 2353 with a brass head.

FURTHER INFORMATION
Is available our boiler catalogue, please contact Värmebaronen.

 Home

The EP NG series is approved by SAQ for installation without an emergency safeguard, level gauge, steam collecting vessel and flow guard. You also save money on assembly and planning.